Saltar al contenido
Contlo by QuestionPro
Explorar la documentación

Email campaigns

An email campaign is a one-time email to the lists and segments you choose. You set the subject and sender, design the content in one of three ways, check it in the preview, send yourself a test and launch it now or at a scheduled time.

Campaigns → Create Campaign → EmailDrag and drop, text or HTMLA/B testingTest before you launch

Las guías están en inglés.

Before you start

  • You need at least one verified sender email. If you have none, a red (Verify Your Email) link appears next to Sender Email and takes you to Settings. See Sender domains.
  • You need a list or segment to send to. See Lists and Segments.
  • Audience selection, scheduling and campaign statuses work the same on every channel. They are covered in Campaigns overview.

Create an email campaign

  1. Open Campaigns and click Create Campaign.
  2. On the Email card, click Create Email. The Email Campaign page opens with a new draft.
  3. Under Campaign details, enter a Campaign Name. Names can only contain letters, numbers, underscores and spaces. Add Tags (Optional) if you want to group campaigns (up to 50 tags).
  4. Under Audience, choose who gets the email in Send To. Tick Don't Send To to exclude lists or segments. Audience Count shows the estimated number of Email Subscribers.
  5. Fill in the subject, sender and reply-to, then choose how to design the content (see the next sections).
  6. Check the Preview card and send a test.
  7. In the bar at the bottom, keep Now ticked or pick a date and time, then click Launch Campaign.

Subject, preheader, sender and reply-to

FieldWhat it does
Email SubjectThe subject line. Required. Use Tags above the field to insert First Name, Last Name or Shop Name at the cursor. The sparkle button next to the field opens the AI assistant for subject lines.
Preheader text (Optional)Tick the box to add the short text inboxes show next to the subject line. The AI assistant is available here too. Unticking the box clears the text.
Sender EmailThe address customers see in their inbox. Pick one of your verified sender emails. Required.
Sender NameThe name customers see in their inbox. Required.
Use this as your reply-to addressTicked: replies go to the sender email. Unticked: a Reply email field appears and you must enter a valid address for replies.

Personalization tags in the subject

Name tags in the subject come with a fallback. First Name is inserted as {{contact.first_name|default:there}}, so a contact with no first name sees "there" instead of a blank. You can edit the word after default: to use your own fallback.

AI assistant for subject and preheader

Click the sparkle button next to the subject or preheader, describe what you want, choose a tone and click Generate. For subjects you can also pick personalization fields. Pick one of the suggestions to place it in the field, or click Generate again for new ones. If you see "Daily limit exceeded! Please try again later", you have used the day's AI allowance. More in Generate with AI.

Choose how to design the email

Under Select an option below to design your email, pick one of three content types.

Template Editor
Drag and drop

Pick a template or build from scratch in the visual editor, with product blocks, coupons and images.

Text Only
Plain, personal email

Write a simple rich-text email in the Text Editor. Good for notes that should look like they came from a person.

Custom HTML
Your own code

Paste or write HTML in the HTML Editor when you already have a coded email.

Template Editor

  1. Click Template Editor. Your draft is saved and the Select Template gallery opens.
  2. Search with Search Templates… and click a template to use it, or click Build from scratch for an empty layout.
  3. Design the email in the editor. See Email editor.
  4. Click Save & Continue to return to the campaign.

Text Only

Click Text Only to open the Text Editor. Write and format your email, and use Insert Tag to add First Name, Last Name, Shop Name, Shop Url or an Unsubscribe link. You can also ask AI to draft the body. Click Preview Email to see the result and Close Preview to go back to editing, then Save & Continue.

Custom HTML

Click Custom HTML to open the HTML Editor. Paste your code, use Insert Tag for the same tags as the Text Editor, check it with Preview Email, then click Save & Continue. If the content is empty you see "Please enter valid content".

Edit or change the content later

Once content exists, the campaign shows its type (Drag & Drop Template, Text Only or Custom HTML) with an Edit Template button. The arrow next to it offers Choose Template (drag and drop only, to pick a different template) and Change Content Type (to switch between the three options).

Generate the whole email with AI

Before you have chosen any content, a Generate with AI button sits at the top right of the page. It opens Generate Email with AI.

  1. Answer What is the use case of this campaign?: Announcements, Sales/Promotions, Festival and Seasonal Greetings, Brand Awareness, Cold Emails, Updates or Event.
  2. Describe the campaign in detail. Type @ to reference a persona, segment or product.
  3. Click Generate. Generation takes about two minutes. You can click Stop Generation to cancel.
  4. When you see "Email Generated Successfully", review the subject and design, then edit as needed.

Preview and send a test

As soon as the campaign has content, a Preview card appears on the right. Switch between Web View and Mobile View with the two icons to check how the email looks on a computer and on a phone.

  1. Click Test Email on the Preview card.
  2. In Send test email, enter the address that should receive it.
  3. Click Send. Any unsaved changes are saved first, then the email is sent and you see "Test email sent".

The test uses the subject, preheader, sender name, sender email and reply-to of the variant you are looking at. If you see "Unable to send test email", check that the campaign has content and a sender email, then try again.

Run an A/B test

An A/B test sends different versions of the email to part of your audience, then picks the winner. Create A/B Test becomes available once the first version has a subject and content.

  1. Click Create A/B Test. The draft is saved and a second variant is added.
  2. In A/B Variants, use the dropdown to switch between Variant 1, Variant 2 and so on. Choose Add Variant to add another.
  3. Give each variant its own subject, preheader, sender details and content.
  4. Set the rules under A/B Test Criteria.
SettingWhat it controlsDefault
What percentage of audience do you want to run the test on?The slider sets the Sample size. The rest of the audience is shown as Winner.80%
How long do you want to run the test for?A number plus Minutes, Hours or Days.1 Hours
What should the winning criteria be?By Click Rate or By Open Rate.By Click Rate

To remove a variant, select it and click the trash icon, then confirm with Yes, Delete. The preview title changes to Preview / Variant N so you always know which version you are checking and testing.

What Contlo checks when you launch

When you click Launch Campaign, Contlo checks your plan, the campaign fields and your sending limits. If everything passes, the Confirm Launch dialog shows roughly how many subscribers will get the email. Click Launch Now or Schedule to confirm, or Back to Edit. The dialog and its warnings are explained in Campaigns overview.

MessageWhat to do
Please enter campaign NameAdd a Campaign Name.
Please select valid Segments/ListsChoose at least one list or segment in Send To.
Please select valid Excluded AudienceYou ticked Don't Send To without choosing anything. Pick a list or segment, or untick the box.
Please select valid schedule dateTick Now or pick a date and time.
Please enter email subjectEvery variant needs a subject.
Please enter sender nameFill in Sender Name on every variant.
Please verify sender email to proceedYou have no verified sender. Set one up in Sender domains.
Please select sender emailChoose a Sender Email on every variant.
Please enter reply-to mail / Please enter a valid reply-to mailEnter a valid Reply email, or tick Use this as your reply-to address.
Please choose the email templatesA variant has no content yet. Pick Template Editor, Text Only or Custom HTML for it.
Insufficient Email credits. Please upgrade your accountThe audience is larger than your remaining email credits. See Billing and plans.
Max Subscribers limit exceeded. Please upgrade your accountYour contacts exceed your plan's subscriber limit. See Billing and plans.
You're allowed to send N emails. Kindly update your audience size or add your own domainYou are sending from a shared domain, which has a cap per campaign. Reduce the audience or verify your own domain in Sender domains.
You've reached your plan limitThe campaign goes over your plan's monthly message limit. Upgrade or reduce the audience.
Insufficient creditsYou do not have enough credits to send this campaign. Add credits, then launch again.
Cannot update the campaign details..The campaign has already moved past the stage where it can be edited, for example because it is already sending or sent.

After you launch

After you confirm, you return to the campaign list. Follow delivery, opens, clicks, orders and revenue in Campaign reports.

Guías relacionadas

¿No encuentras algo? Escríbenos