Aller au contenu
Contlo by QuestionPro
Parcourir la documentation

Automation builder

The automation builder is a visual canvas. You pick the trigger that starts the flow, add steps below it, and configure each step in the panel on the right. Changes save as a draft while you work, and nothing reaches customers until you launch.

Automations → Create Automation, or Edit on any automationDrag and drop stepsSaves as you goPublish when ready

Les guides sont en anglais.

Find your way around

AreaWhat it is for
Top barThe automation name (click the pencil to rename), the save status (Saving... then Saved!), Exit, and the launch button: Launch Automation, Publish Changes or Published. The more menu holds Discard Draft.
Left panelShow Analytics and the blocks you can add, grouped as Message blocks and Flow actions. Collapse it with the arrow at the bottom, and bring it back with the button at the top left of the canvas.
CanvasThe flow, top to bottom. It starts with the Trigger card and each path ends at EXIT. Scroll to pan and use the controls at the bottom right to zoom.
Right panelThe settings for the step you clicked. The selected card is highlighted.

Add, order and delete steps

Every connection between two steps has a + button. Steps are connected for you: wherever you add a step, the flow is re-linked through it.

  1. Drag a block from the left panel onto a + on the canvas. Valid drop points grow and turn dashed while you drag. Or click a + and pick a block from the menu.
  2. Click the new card to open its settings in the right panel.
  3. To add a step between two existing steps, use the + between them. The steps below move down.
  4. To remove a step, open the menu on its card and click Delete, then confirm with Yes, delete.
  • The Trigger card is always first and cannot be deleted.
  • Message blocks appear only for channels that are set up for your account.
  • A Split cannot be added inside an A/B test path.
  • Steps cannot be dragged to a new position. To move a step, delete it and add it again where you want it.

Set the trigger and who enters

Click the Trigger card. The trigger is the event that puts a contact into the automation. Everything else in this panel narrows who enters and when they leave.

  1. Under Trigger, search for and select an event, for example Checkout Started, Placed Order or Subscribed To Email. Triggers are grouped by type. If an information icon appears beside the panel title, hover it for a note about that trigger.
  2. Click Add Trigger Filters to limit entry by details of the event itself, such as the products in the order or the cart value. If the panel says Trigger Filters Not Applicable, that trigger has no event details to filter on.
  3. Click Add User Filters to limit entry by who the contact is, such as a segment they belong to, their country or whether they subscribe to a channel.

How filters combine

  • Each filter is a condition: pick the property, the comparison and the value.
  • Click OR inside a box to add an alternative. A box matches when any one of its conditions is true.
  • Click AND below a box to add another box. A contact must match every box.
  • Click the x on a condition to remove it. The heading shows how many filters are added, and you can collapse the list by clicking it.
  • Value pickers for products, collections, segments and lists search as you type. Enter at least 3 characters.

Exit conditions and re-entry rules

Cancel Trigger

A cancel trigger removes a contact from the flow when another event happens. Their pending steps are cancelled and no more messages from this run are sent. The classic case is an abandoned checkout flow that stops when the customer places the order.

  1. In the Trigger panel, turn on Cancel Trigger.
  2. Click Add Cancel Trigger and select the event that should end the flow.
  3. Add more cancel triggers if several events should end it. Remove one with the trash icon.

On some accounts a filter icon appears beside a cancel trigger, so the flow only ends when the cancelling event also matches conditions you set. If you don't see it, it isn't enabled for your account yet. Write to hello@contlo.com.

Exit when an order is placed

For cart, checkout, browse, price drop, back in stock, list and segment triggers you may see an Exit when an order is placed button. One click adds Placed Order as a cancel trigger, and a green Exits when an order is placed badge confirms it. It applies to customers who enter after you publish, and their pending messages stop as soon as they order. If the button is not shown, add Placed Order as a cancel trigger yourself.

Frequency

Turn on Frequency to stop the same contact from entering this automation again too soon. Set In Last to a number of Hours, Days or Weeks. A contact who entered within that window is skipped when the trigger fires again.

Back-Populate Recipients

Back-population adds contacts who performed the trigger in the past, so a new automation does not start from zero. If you don't see Back-Populate Recipients in the Trigger panel, it isn't enabled for your account yet. Write to hello@contlo.com.

  1. Select a trigger and add at least one Time Delay step. The delays in the flow must total at least one day.
  2. In the Trigger panel, click Add Profiles.
  3. Choose the period: Last 30 Days, Last 60 Days, Last 180 days or Custom Range (up to one year back).
  4. Click Proceed to Back-Populate. Past profiles are added after you publish. An In Progress badge shows while it runs.
  • Eligible recipients are added at the beginning of the automation and skip messages they have already received.
  • Automations that contain coupons cannot have past profiles added.
  • Profiles that were back-populated before are not added again.
  • Birthday, price drop and back in stock triggers are not eligible: you see "This trigger is not eligible for back population".
  • "Time Delay not found. Please add a Time Delay Action" and "Time Delay Value should be greater than 1 day" mean the flow needs more delay before you can back-populate.

Add a delay

Add a Time Delay block wherever the flow should pause. The card shows the wait as Wait For: followed by the amount.

SettingWhat it does
Wait ForHow long to wait before the next step, in Minutes, Hours, Days or Weeks.
Delay until a specific time of dayAfter the wait, hold until a set time. Pick the time and the timezone it is measured in.
Delay until a specific day(s) of the weekAfter the wait, hold until the next selected weekday. Click the day buttons to select them. At least one day stays selected.

Branch the flow: splits and A/B tests

Split

A Split sends contacts down a Yes path or a No path based on filters. Configure it exactly like the trigger: Add Trigger Filters for details of the event that started the run, and Add User Filters for who the contact is. Contacts who match go down Yes, everyone else goes down No. Each path has its own steps and its own EXIT.

A split needs at least one filter. Until then its card shows "No Trigger/Audience Filters Added". Use splits to treat high-value carts differently, to send WhatsApp only to WhatsApp subscribers, or to skip a discount for customers in a VIP segment.

A/B Testing

An A/B Testing step divides contacts at random between Path A and Path B so you can compare two versions of a message, an offer or a delay. Drag the Participant Splitting slider to set the share for each path. The card shows the ratio, for example 50:50. After the two paths, the flow joins again and continues with the steps below.

Once the test has been published, Choose Winner appears in the panel. Click Select Path A or Select Path B and confirm with Select Winner. The winning path stays in the flow and the other path is deleted.

Delete a split or an A/B test

  • Deleting a split with steps in its paths asks which to remove: Delete YES Path, Delete NO Path or Delete both paths. If you keep one path, its steps stay in the flow in place of the split.
  • Deleting an A/B test asks you to Choose Path A, Choose Path B or Delete both paths. Choosing a path keeps it as the winner.

Send messages and edit their content

Add a message block and click its card. Full field lists for every channel are in the Triggers and actions reference.

Email

  1. Enter the Subject. Use the emoji and variable buttons above the field to insert an emoji or a tag such as First Name.
  2. Optionally tick Email Preheader and enter the text shown next to the subject in the inbox.
  3. Enter the Sender Name and choose the Sender Email. If the list is empty, click (Verify Your Email) to verify a sender first.
  4. Leave Use this email as your reply-to mail ticked, or untick it and enter a different reply-to address.
  5. Click Add Content and choose Drag and Drop (pick a template, then design it in the email editor), Text Only (a plain text editor) or Custom HTML (paste your own code).
  6. Click Save & Continue in the editor to return to the flow.

Afterwards, Edit Email reopens the content and Change Content Type lets you start again with a different editor. On the canvas, Click to view Content on the email card opens a preview. The drag and drop editor works the same way as for campaigns: see Email editor.

SMS

The panel shows your Sender. Depending on your SMS setup you either type the Message Text yourself, or click Browse Templates, pick an approved template and click Load Template, then fill each variable. With free text you can tick the option to add "Reply STOP to unsubscribe." and, on Shopify, Add Discount to insert a discount code. If your sender supports picture messages, Upload Image is also shown. See SMS settings.

WhatsApp

Click Browse Templates, choose an approved template and click Load Template. Then fill the template's variables, map its buttons, and add the attachment if the template has a media header. Templates are created and approved in WhatsApp templates.

Web Push and Mobile Push

Enter the Title, the Push Message and the Target Url the notification opens. Optionally click Upload Hero Image, tick Add Expiry Date, and click Add Button to add up to two buttons. Mobile push also has a Subtitle, and its buttons use a Deeplink.

Filling template variables

SMS and WhatsApp templates show each variable as a slot. Click a slot and choose how to fill it:

ModeWhat it does
TagsA predefined variable that is replaced with each contact's own data, such as First Name, Order Id or Abandoned Cart Url.
CustomFixed text that is the same in every message.
URLA custom link. It is shortened when the message is sent.

Smart Sending

Smart sending skips a message if the contact already received a message on any channel within your smart sending period, shown in hours in the panel. Turn it on per message with the Smart Sending switch at the bottom of a message panel, or for the whole automation with the Smart Period switch in the top bar. When Smart Period is on, the per-message switches are hidden.

  • Smart sending is not applied to automations triggered by order, fulfillment, checkout or referral events, so transactional and recovery messages are never held back. The switches are off and disabled for those triggers.
  • If you don't see the switches, smart sending isn't enabled for your account yet. Write to hello@contlo.com.

Webhooks and internal notifications

  • Webhook sends data to another system when a contact reaches the step. Set the Destination URL, add any Request Headers with Add Header, and write the Request Body as JSON. The request type is POST.
  • Internal Notification emails your own team when a contact reaches the step, for example to alert sales about a high-value order. Enter the Recipients separated by commas, the Sender Name, Sender Email, Subject and Body.

Save drafts and publish

You never need to press save. Each change is stored as a draft as soon as you make it, and the top bar shows Saving... then Saved!. A draft is private: customers only ever get the published version.

ButtonWhen you see itWhat it does
Launch AutomationThe automation is disabled.Publishes the draft, enables the automation and returns you to the Automations page. Unavailable until every step is complete.
Publish ChangesThe automation is enabled and has unpublished changes.Replaces the live version with your draft and returns you to the Automations page.
PublishedThe automation is enabled and has no unpublished changes.Nothing to do: the live version matches what you see.
Discard Draft (more menu)Any time.Throws away unpublished changes and restores the last published version.
ExitAny time.Leaves the builder. Your draft is kept.

To rename the automation, click the pencil beside its name, edit Automation Name and click Update Automation. The name cannot be empty.

Edit a live automation

  1. On the Automations page, click Edit on the automation.
  2. Make your changes. The live automation keeps running on the published version while you work.
  3. Click Publish Changes to put the changes live.

If you click Exit with unpublished changes on an enabled automation, Contlo asks "Your changes aren't published". Choose Yes, publish to publish and leave, or No, save changes to leave and keep the draft for later. If a step is incomplete, Exit keeps you in the builder: complete the step, or use Discard Draft to drop the changes.

Test before you launch

Test each message from its own panel. Tests send the draft content, so you can check a message before the automation is live.

ChannelHow to test
EmailIn the drag and drop editor, click Preview to see Desktop and Mobile views, or open the more menu, click Test Email, enter an address and click Send. The text and HTML editors have Preview Email with web and mobile views.
SMSUnder Test SMS Message, enter a phone number and click Send Test. Message Sent confirms it.
WhatsAppUnder Test WhatsApp Message, enter a phone number and click Send Test. If the send fails, the reason is shown under the button.
Web PushClick Preview Push to send the notification to your own browser. Allow notifications when your browser asks.
Mobile PushClick Send Test Automation and enter the test contact. The button only opens the test once the title, message and URL are filled in.

Troubleshooting

What you seeWhat to do
Launch Automation or Publish Changes is greyed outLook for cards with red text and complete them. The message panel also shows the first problem at the top, for example "Please enter email subject" or "Please choose the email content type".
"Please verify sender email to proceed"No verified sender exists. Click (Verify Your Email) and verify one. See Sender domains.
"Selected template is not whitelisted" or "Template not whitelisted!"The SMS or WhatsApp template is not approved yet. Choose an approved template or wait for approval.
"Expiry Date exceeds 28 days"A push notification can expire at most 28 days after it is scheduled. Pick an earlier date.
"Could not add step"The step was not saved. Try again, and refresh the page if it keeps happening.
"Trigger has already been added. Please refresh the page."The builder is out of date, usually because the automation is open in another tab. Refresh.
Preview Push shows "Have you disabled notifications or Are you using incognito mode?"Your browser is blocking notifications. Allow them for the Contlo app, leave private browsing, and try again.
The trigger field is greyed outThe automation has been published before, so the trigger is locked. Clone it or build a new one to use a different trigger.

Guides associés

Vous ne trouvez pas quelque chose ? Nous écrire