Aller au contenu
Contlo by QuestionPro
Parcourir la documentation

Campaigns overview

A campaign is a one-time message you send to chosen segments and lists, now or at a time you pick. The Campaigns page lists every campaign with its status, results and revenue, and is where you start a new one on email, SMS, WhatsApp, web push or mobile push.

CampaignsEmail · SMS · WhatsApp · PushSend now or scheduleClone any campaign

Les guides sont en anglais.

The Campaigns page

Open Campaigns in the sidebar. Each row is one campaign. Click a draft to keep editing it, or click any other campaign to open its results.

ColumnWhat it shows
Channel iconThe channel the campaign uses: email, SMS, WhatsApp, web push or mobile push.
CampaignThe name, then Sent to: (the segments and lists included), Not Sent to: (the ones excluded, if any) and Sent on:. For a scheduled campaign these read Will send to:, Will not send to: and Scheduled on:.
StatusDraft, Scheduled, Sent or Paused. See Campaign statuses.
SentHow many messages were sent.
OpenedThe open rate. SMS shows N/A because SMS has no read receipts, and mobile push shows NA.
CTRThe click-through rate. See Campaign reports for how it is calculated.
RevenueRevenue from orders credited to the campaign. This column appears for Shopify and WooCommerce stores, and for accounts with revenue tracking enabled.
ActionsThe main action for the row plus a More actions menu. See Row actions.

The list shows 20 campaigns per page. When Contlo has enough history, a banner above the list reads The best time to send your campaigns are: followed by a suggested time for each channel.

Tabs, search and filters

Four tabs split the list by status: All, Sent, Scheduled and Drafts. Use Search Campaigns to find a campaign by name. Contlo remembers your tab, search and filters, so the list looks the same when you come back from a campaign.

Click Filters to narrow or sort the list, then click Apply.

FilterOptions
By ChannelAll, or one of the channels turned on for your account: Email, SMS, Whatsapp, Web Push, Mobile Push.
By TagsOne or more campaign tags. A campaign matches if it has any of the tags you pick.
By PeriodLast 3 Days, Last 7 Days, Last 30 days, Last month or Custom Range. On the Sent tab the period is matched against the send time. On the other tabs it is matched against the date the campaign was created.
Sort ByRevenue, CTR or Opened, with Highest First or Lowest First. If you pick a metric without an order, Contlo uses Highest First.

A number on the Filters button shows how many filters differ from the defaults. Click Clear Filters to reset them.

Saved filters

If you see a Saved filters menu next to Filters, you can save the current filters and search under a name and reapply them in one click. Use Save as new, Save changes, Rename and Delete from the menu. You can save up to 20 filters, each with a name of up to 40 characters. Saved filters are stored in your browser, so they are not shared with your team or your other devices. If you don't see the menu, it isn't enabled for your account yet. Ask your account manager or write to hello@contlo.com.

Export

Click Export to download a CSV of campaign results. See Export results for the columns and which filters the file follows. Team members with the Operator role don't see Export.

Campaign statuses

StatusWhat it meansWhat you can do
DraftThe campaign is saved but not launched. A campaign becomes a draft the moment you pick a channel, and nothing is sent from a draft.Edit, Clone, Delete
ScheduledThe campaign is launched and waiting for its send time.Move to Drafts, Clone, Delete
SentThe campaign has gone out. While sending is still in progress, the row shows Sent with the line Numbers will be updated soon.View, Clone, Delete
PausedThe send was put on hold before it finished.View, Clone, Delete

The Drafts tab lists drafts, the Scheduled tab lists scheduled campaigns and the Sent tab lists campaigns that have finished sending.

Channels you can send on

Go to Campaigns → Create Campaign to see the channels available to you. Each campaign uses one channel.

ChannelButtonNotes
EmailCreate EmailAlways available. See Email campaigns.
SMSCreate SMS or Install SMSInstall SMS appears until the SMS app is installed, and takes you to its page in the App Market. See SMS campaigns.
Web PushCreate Web PushShown when web push is turned on for your account. See Push campaigns.
Mobile PushCreate Mobile PushShown when mobile push is turned on for your account. See Push campaigns.
WhatsappCreate Whatsapp or Install WhatsappShown when WhatsApp is turned on for your account. Install Whatsapp takes you to the app's page in the App Market. See WhatsApp campaigns.

If a channel card is missing, that channel isn't enabled for your account yet. Ask your account manager or write to hello@contlo.com.

Create a campaign

Every channel follows the same steps. Only the message itself differs, and the channel articles cover that part.

  1. Go to Campaigns → Create Campaign and click a channel. Contlo creates a draft right away and opens the campaign editor.
  2. Under Campaign details, enter a Campaign Name and, if you want, add Tags (Optional).
  3. Under Audience, choose who gets the campaign in Send To, and tick Don't Send To to exclude anyone.
  4. Write the message in the channel section below the audience.
  5. In the bar at the bottom, next to Scheduled Time, keep Now ticked to send right away, or untick it and pick a date and time.
  6. Click Launch Campaign, check the summary, then click Launch Now or Schedule.

Name and tags

  • A new campaign starts with a placeholder name such as New Campaign 12. Rename it so you can find it later.
  • The name can only contain letters, numbers, underscores and spaces.
  • Tags group campaigns so you can filter the list with By Tags. Pick existing tags or type a new one. A campaign can have up to 50 tags.

Audience

  • Send To accepts any mix of segments and lists. You must pick at least one.
  • Don't Send To is off by default. Tick it and choose the segments or lists to leave out. Anyone in an excluded group is skipped, even if they are also in a group you send to.
  • Audience Count shows the estimated number of subscribers on that channel, and recalculates each time you change the audience. It is an estimate, and the final number can differ at send time.
  • A segment appears in the picker once it has finished calculating. If you just created a segment and can't find it, wait for it to finish and reopen the campaign.

Message

For WhatsApp, see WhatsApp campaigns. For the drag and drop designer, see Email editor.

Send now or schedule

The bar at the bottom of the editor controls timing. With Now ticked, the campaign starts sending as soon as you confirm the launch. Untick Now to show Pick date & time, then choose the day and a time in 30-minute steps.

  • Scheduled times use your store's time zone. The confirmation shows this as Merchant Timezone.
  • A scheduled campaign waits in the Scheduled tab. To change it, click Move to Drafts, edit it and launch it again.

Quiet hours and smart sending

Two account settings can change who receives a campaign and when. Both are set in Settings, under General Settings. Contlo checks them when you click Launch Campaign and warns you in the confirmation.

WarningWhy you see itWhat happens
Launching in Quiet Period! or Scheduling in Quiet Period!The send time falls inside your Quiet Hours. Quiet hours apply to SMS and WhatsApp, and to email only when Enable Quiet Period for Email is on. They never apply to web push or mobile push.The campaign launches right after the quiet period ends. Pick a time outside quiet hours if the timing matters.
Smart Send Alert!A segment in this campaign was used in another campaign inside your Smart Sending Period.Smart sending skips recipients who received a message on any channel within that period, so fewer people may get this campaign. Check the audience before you launch.

A/B testing and UTM tracking

A/B testing is available for email campaigns. In the email campaign editor, click Create A/B Test once the first email has a subject and content. You then add variants and set the A/B Test Criteria: the share of the audience to test on, how long the test runs (in minutes, hours or days) and whether the winner is picked By Click Rate or By Open Rate. The rest of the audience receives the winner. See Email campaigns for the full steps and Campaign reports for reading the results.

UTM parameters are added to the links in your campaign messages according to your account's UTM settings, which have separate values for campaigns. See UTM tracking.

Review and launch

Click Launch Campaign to open Confirm Launch of followed by your campaign name. It shows about how many subscribers will receive the campaign and, for a scheduled campaign, when. If the count is still being worked out, you see Calculating audience count. Please wait.

  • Click Launch Now (or Schedule for a scheduled campaign) to confirm.
  • Click Back to Edit to return to the editor without launching.
  • Read any quiet period or smart send warning before you confirm.

To stop without launching, click Save changes to keep the draft. If you click Back with unsaved edits, Contlo asks whether to Save changes & Exit or Discard changes & Exit.

Row actions

ActionAvailable onWhat it does
EditDraftsOpens the campaign editor so you can finish and launch the campaign.
Move to DraftsScheduled campaignsCancels the scheduled send and turns the campaign back into a draft. The scheduled time is cleared, so set it again before you relaunch. You are asked to confirm with Yes, move to Drafts.
ViewSent and paused campaignsOpens the campaign's results. See Campaign reports.
CloneEvery campaign, under More actionsCreates a new draft with the same audience, message, tags and A/B test settings, and opens it in the editor. The copy gets a placeholder name, so rename it.
DeleteEvery campaign, under More actionsRemoves the campaign from the list after you confirm with Yes, Delete. Deleting a WhatsApp campaign also stops any auto retries that have not gone out yet.

Messages you might see

MessageWhat to do
Please enter campaign nameFill in Campaign Name.
Campaign name can only contain alphanumeric characters, underscores, and spacesRemove punctuation, emoji and other symbols from the name.
Please select valid Segments/ListsPick at least one segment or list in Send To.
Please select valid Excluded AudienceDon't Send To is ticked but empty. Choose a segment or list to exclude, or untick it.
Please select audience group with more than zero contactsThe audience count is zero for this channel. Choose a segment or list with subscribers on the channel, or reduce the exclusions.
Please select valid schedule dateNow is unticked but no valid date and time is set. Pick a future date and time.
You can only add up to 50 tags.Remove a tag before adding another.
You've reached your plan limitThe campaign's audience or your monthly message count is over what your plan allows. Reduce the audience or upgrade. See Billing and plans.
Could not create the campaign, Could not clone the campaign or Could not move the campaign to draftsTry again. If it keeps happening, write to hello@contlo.com.

Guides associés

Vous ne trouvez pas quelque chose ? Nous écrire